Etc Sensor3 CE (ESR3) Rack Instrukcja Użytkownika Pobierz pdf (Strona 37)

5 Finishing Installation 29

with two Phillips head screws (included).

Figure 28: Attaching the top door hinge

Step 2: The bottom hinge on the ESR3-12 is a different design from the one used on the

ESR3-24, ESR3-26 and ESR3-48.

• ESR3-12 – Insert the bottom hinge into the slot on the bottom of the rack and

attach it to the frame with two Phillips head screws (included).

Figure 29: Attaching the ESR3-12 bottom hinge

• ESR3-24, ESR3-36 and ESR3-48 – Remove the large Phillips head screw,

insert the hinge into the slot and secure it by replacing the screw.

Figure 30: Attaching the ESR3-48 bottom hinge

• Drive the narrow end of one taper pin into the bottom of the door. Put the

Top hinge being inserted Top hinge in place

Bottom hinge

being inserted

Bottom hinge

in place

Bottom hinge

in place

Bottom hinge

being inserted

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 47 48

Brak uwag

Etc Sensor3 CE (ESR3) Rack Instrukcja Użytkownika Strona 37